F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Alignment: Service and Repair
Camber and Caster Adjustment
Camber and Caster Adjustment -F-250 and F-350 Four Wheel Drive (4WD), F-450, F-550
Special Tool(s)
1. CAUTION: Do not bend the axles or the radius arms to change alignment angles or damage to the vehicles axle and radius arms can
occur.
Using alignment equipment and the manufacturer's instructions, measure the caster and camber.
^
Refer to Alignment Specifications for optimal alignment settings.
^
If the caster and camber values are not within specification, go to the next step.
2. Remove the cotter pin and the nut from the upper ball joint.
^
Discard the cotter pin.
3. Loosely install the nut, inverted, onto the upper ball joint stud.
4. Loosen the lower ball joint nut to the end of the lower ball joint stud.
