F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
EGR Cooler: Service and Repair
Exhaust Gas Recirculation (EGR) Cooler - Horizontal Cooler
EXHAUST GAS RECIRCULATION (EGR) COOLER - HORIZONTAL COOLER
Removal and Installation
1. NOTE: The horizontal EGR cooler mounting clamps are one time use only, new clamps must be installed each time the clamp nuts are loosened
or removed. The LH exhaust manifold bolts and gaskets are also one time use only. Since it is necessary to remove 4 of the LH exhaust manifold
bolts to remove the horizontal EGR cooler mounting bracket, the LH exhaust manifold must also be removed to install new gaskets and bolts. For
that reason, the EGR cooler removal steps are included in the LH exhaust manifold procedure.
Remove the LH exhaust manifold.
2. To install, reverse the removal procedure.
