F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Inertia Fuel Shutoff Switch: Service and Repair
INERTIA FUEL SHUTOFF (IFS) SWITCH
Removal and Installation
1. Open the glove compartment.
2. Release the glove compartment stop and lower the glove compartment.
3. Remove the inertia fuel shutoff (IFS) switch retaining bolts (2 required).
4. Disconnect the IFS switch electrical connector and remove the IFS switch from the vehicle.
5. To install, reverse the removal procedure.
