F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Removal and Installation
CAUTION: While repairing the power steering system, care should be taken to prevent the entry of foreign material or failure of the power
steering components may result.
1. Release the clamps and disconnect the 2 hoses.
2. Unclip the hood release cable.
3. Remove the 2 bolts and the power steering fluid cooler.
^
To install, tighten to 35 Nm (26 ft. lbs.).
4. To install, reverse the removal procedure.
^
Fill the power steering system.