F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Installation
NOTICE: To avoid damage to components, do not use heat to aid installation.
NOTE: Clean the wheel knuckle ball joint bores.
NOTE: The upper ball joint must be installed first.
1. Using the C-Frame and Screw Installer/Remover and Ball joint Installer/Remover, install the upper ball joint.
2. Using the C-Frame and Screw Installer/Remover and Ball Joint Installer/Remover, install the lower ball joint.
3. Install the snap ring in the groove at the bottom of the lower ball joint.
4. Install the lower ball joint grease plug.
5. Install the front wheel spindle or wheel knuckle assembly.