F 550 2WD Super Duty V8-6.4L DSL Turbo (2008)
Shifter A/T: Service and Repair
Selector Lever Mechanism
Selector Lever Mechanism
Removal
1. Remove the instrument cluster. For additional information, refer to Instrument Panel, Gauges and Warning Indicators.
2. Disconnect the selector lever cable.
3. Remove the locking pin and the park lock cable (PLC).
1. Remove and discard the locking pin.
2. Disconnect the PLC.
4. Disconnect the transmission control (TC) switch electrical connector and the harness from the retaining clips.
5. Remove the selector lever bolt.
