F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
6. Loosen the clamps and remove the intercooler tube.
7. Remove the screws and remove the evaporator core housing support bracket.
8. Remove the 11 screws, release the 3 retaining tabs and remove the evaporator core cover.
9. Remove the evaporator core.
INSTALLATION
1. To install, reverse the removal procedure.
^
Install a new A/C evaporator core with the correct amount of PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA
(Motorcraft YN-12-C) or equivalent meeting Ford specification WSH-M1C231-B.
^
Install new O-rings lubricated in clean PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B.
2. Evacuate, leak test and charge the A/C system.
