F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
Throttle Cable/Linkage: Service and Repair
Adjustable Accelerator Pedal
REMOVAL
NOTE: To ease removal, the accelerator pedal should be in the most rearward (toward the driver) position.
1. Disconnect the electrical connector.
1
Slide the red safety tab up.
2
Push the tab and disconnect the connector.
NOTE: The accelerator pedal is removed from the vehicle for clarity.
2. Disconnect the accelerator pedal adjuster cable.
3. Remove the bolts and the accelerator pedal.
INSTALLATION
1. To install, reverse the removal procedure.
^
If a new accelerator pedal is being installed, make sure the brake pedal is in the most rearward (toward the driver) position before connecting
the accelerator pedal adjuster cable.
