F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS,
NOTES, AND INSTRUCTIONS IN THE STEERING WHEEL REMOVAL AND INSTALLATION PROCEDURE.
14. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
15. Connect the battery ground cable.
16. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
17. Disconnect the battery ground cable and wait at least one minute.
18. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
19. Install the driver air bag module.
1
Connect the horn electrical connector.
2
Connect the driver air bag module electrical connector.
3
Position the driver air bag module into the steering wheel.
4
Install the two bolts.
5
Install the two steering wheel back cover plugs.
20. Restore the vehicle to operating condition.
1
Reactivate the supplemental restraint system (SRS).
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS,
CAUTIONS, NOTES, AND INSTRUCTIONS IN THE SUPPLEMENTAL RESTRAINT SYSTEM (SRS)
DEACTIVATION/REACTIVATION PROCEDURE.
2
With all the restraint system diagnostic tools removed, prove out the supplemental restraint system (SRS). See: Air Bag(s) Arming and
Disarming/Service and Repair/Prove Out Procedure
