F 550 2WD Super Duty V8-7.3L DSL Turbo VIN F (2002)
3. Install the safety belt anchor and nut.
^
Make sure the anti-rotation tab is properly positioned into the seat frame.
NOTE: Prior to installation, make sure the safety belt webbing is not twisted.
4. Install the safety belt web guides.
1
Position the front safety belt web guide.
2
Position the upper safety belt web guide.
3
Install the pin-type retainers.
5. Position the bracket as noted in removal. Install the screws.
NOTE: Do not reverse the bracket during installation.
6. Install the four tower cap attachment screws. Install the inboard, outboard and front screw covers.
