F 550 4WD Super Duty V10-6.8L (2009)
Front Door Window Motor: Service and Repair
Window Regulator Motor - Front Door
Window Regulator Motor - Front Door
Removal and Installation
1. Remove the window regulator and motor assembly. For additional information, refer to Window Regulator and Motor - Front Door See: Front
Door Window Regulator/Service and Repair/Window Regulator and Motor - Front Door.
2. WARNING: When removing the window regulator motor, place the window in the full upward position or block the window regulator
arm to help prevent the counterbalance spring from unwinding with high force. Failure to follow this instruction may result in serious
personal injury.
Remove the window motor bolts and the motor.
-
To install, tighten to 13 Nm (115 lb-in).
3. To install, reverse the removal procedure.
