F 550 4WD Super Duty V10-6.8L (2009)
Hood Latch: Service and Repair
Hood Latch
Hood Latch
Removal and Installation
1. Mark the position of the hood latch.
2. Disconnect the secondary hood latch release cable from the hood latch.
-
Disconnect the cable conduit.
-
Disconnect the cable.
3. Remove the 2 hood latch bolts.
-
To install, tighten to 35 Nm (26 lb-ft).
4. Turn the hood latch 180 degrees and disconnect the primary hood latch release cable B from the hood latch.
-
Disconnect the cable conduit.
-
Disconnect the cable.
5. Remove the hood latch.
6. To install, reverse the removal procedure.
