F 550 4WD Super Duty V10-6.8L (2009)
2. Loosely install the transmission support crossmember nuts and bolts (RH side).
3. Tighten the transmission support crossmember nuts and bolts (LH side).
-
Tighten to 90 Nm (66 lb-ft).
4. NOTE: Make sure to install the transmission crossmember gusset-to-transmission crossmember bolts as shown to avoid interference with the
exhaust.
Loosely install the nuts and bolts retaining the transmission crossmember gusset to the transmission support crossmember.