F 550 4WD Super Duty V10-6.8L (2009)
Remove the shoulder safety belt guide.
1. Position the shoulder safety belt guide cover upward.
2. Remove the shoulder safety belt guide bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
3. Remove the shoulder safety belt guide.
5. Remove the safety belt anchor.
-
Remove the safety belt anchor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Remove the safety belt anchor.
6. Remove the B-pillar trim panel.
-
Route the safety belt and the shoulder safety belt guide through the B-pillar trim panel.
7. NOTICE: To avoid damage to the B-pillar trim panel, remove any retaining clips from the body and attach them to the B-pillar trim
panel before installing.
To install, reverse the removal procedure.
C-Pillar Trim Panel - Crew Cab
C-Pillar Trim Panel - Crew Cab
Removal and Installation
1. NOTICE: To avoid damage to the scuff plate trim panel, remove any retaining clips from the body and attach them to the scuff plate trim
panel before installing.
Remove the rear door opening scuff plate trim panel.
2. Fold the rear seat backrests down.
3. NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or the cover does not
remain closed, install a new shoulder safety belt guide.
