F 550 4WD Super Duty V10-6.8L (2009)
4. Disconnect the upper brake tube fitting from the brake flexible hose.
-
To install, tighten to 18 Nm (159 lb-in).
5. Remove the retaining clip.
6. Disconnect the lower brake tube fitting from the brake flexible hose.
-
To install, tighten to 18 Nm (159 lb-in).
7. If equipped, disconnect the axle vent hose from the bolt. Remove the brake flexible hose bolt and the brake hose.
-
To install, tighten to 30 Nm (22 lb-ft).
All brake flexible hoses
8. To install, reverse the removal procedure.
-
Install new copper washers.
-
Bleed the brake caliper.
