F 550 4WD Super Duty V10-6.8L (2009)
14. Install the LH valve cover. For additional information, refer to Valve Cover - LH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - LH.
Camshaft - RH
Camshaft - RH
Removal
NOTICE: The camshaft procedure must be followed exactly or damage to the valves and pistons will result.
1. Position the crankshaft damper spoke at the 12 o'clock position and the timing mark indentation at the 1 o'clock position.
2. Remove the RH valve cover. For additional information, refer to Valve Cover - RH See: Cylinder Head Assembly/Valve Cover/Service and
Repair/Valve Cover - RH.
3. NOTICE: Only use hand tools to loosen the camshaft sprocket bolt or damage may occur to the camshaft or camshaft sprocket.
Loosen and backoff the RH camshaft sprocket bolt one full turn.