F 550 4WD Super Duty V10-6.8L (2009)
32. NOTICE: If the components are to be reinstalled, they must be installed into their original locations or damage to the engine may occur.
NOTE: Do not allow the valve keepers to fall off the valve or the valve may drop into the cylinder. If a valve drops into the cylinder, the cylinder
head must be removed. For additional information, refer to Cylinder Head See: Cylinder Head Assembly/Service and Repair/Removal and
Replacement/Cylinder Head - Removal.
NOTE: It may be necessary to push the valve down while compressing the spring.
Using the Valve Spring Compressor, install the roller follower.
-
Lubricate the camshaft roller follower with clean engine oil prior to installation.