F 550 4WD Super Duty V10-6.8L (2009)
Exhaust Manifold: Specifications
Install 20 new exhaust manifold-to-cylinder head studs.
Tighten to....................................................................................................................................................................................................12 Nm (106 lb-in).
Position 2 new gaskets, the LH exhaust manifold and tighten the 10 new nuts in the sequence shown.
Tighten to.......................................................................................................................................................................................................25 Nm (18 lb-ft).
Exhaust Manifold - LH
Position the exhaust manifold heat shield and install the 3 bolts.
Tighten to....................................................................................................................................................................................................14 Nm (124 lb-in).
Position 2 new gaskets, the RH exhaust manifold and tighten the 10 new nuts in the sequence shown.
Tighten to.......................................................................................................................................................................................................25 Nm (18 lb-ft).
Exhaust Manifold - RH
Position the exhaust manifold heat shield and install the 2 bolts.
Tighten to....................................................................................................................................................................................................14 Nm (124 lb-in).
