F 550 4WD Super Duty V10-6.8L (2009)
2. Remove the rear seat backrest.
Crew Cab vehicle with bench seat
3. Using an appropriate tool, push in the pin hole while pulling the safety belt tongue out of the safety belt buckle.
-
After installation, when inserting the safety belt tongue into the safety belt buckle, make sure the safety belt buckle and safety belt retractor
webbing are not twisted.
4. Fold the rear bench seat backrest forward.
Crew Cab vehicle with 60/40 seat
5. Using an appropriate tool, push in the pin hole while pulling the safety belt tongue out of the safety belt buckle.
-
After installation, when inserting the safety belt tongue into the safety belt buckle, make sure the safety belt buckle and safety belt retractor
webbing are not twisted.
