F 550 4WD Super Duty V10-6.8L (2009)
3. Remove the safety belt retractor.
-
Remove the safety belt retractor bolt.
-
To install, tighten to 40 Nm (30 lb-ft).
-
Pull the safety belt retractor away from the sheet metal, disengaging the anti-rotation tab.
-
Remove the safety belt retractor.
4. NOTE: Before installation, make sure the safety belt webbing is not twisted and the safety belts and buckles are accessible to the occupants.
To install, reverse the removal procedure.
5. Check the active restraint system for correct operation. For additional information, refer to the appropriate Functional Test procedure in Safety
Belt System See: Testing and Inspection/Component Tests and General Diagnostics.
