F 550 4WD Super Duty V10-6.8L (2009)
Wiper Motor: Service and Repair
Wiper Motor
Removal and Installation
1. Remove the wiper mounting arm and pivot shaft assembly. For additional information, refer to Wiper Mounting Arm and Pivot Shaft See: Wiper
Arm/Service and Repair/Wiper Mounting Arm and Pivot Shaft.
2. Remove the wiper pivot arm bolt and the windshield wiper linkage arm.
-
To install, tighten to 35 Nm (26 lb-ft).
3. Remove the 3 windshield wiper motor bolts and the windshield wiper motor.
-
To install, tighten to 15 Nm (133 lb-in).
4. To install, reverse the removal procedure.
