F 550 4WD Super Duty V10-6.8L VIN D (2004)
Brake Rotor/Disc: Service and Repair
Front
Disc-F-250, F-350 4x4
Material
Material
Removal
1. Remove the disc brake caliper anchor plate.
2. NOTE: Perform this step for F-250 and F-350 4x4 SRW vehicles.
Remove the rotor.
3. NOTE: Perform this step for DRW vehicles.
NOTE: If excessive force must be used during brake rotor removal, the brake rotors should be checked for lateral runout prior to installation.
Remove the eight hub extender nuts, the hub plate and the rotor.
1
Remove the eight hub plate nuts.
2
Remove the hub plate.
3
Remove the rotor.
Installation
