F 550 4WD Super Duty V10-6.8L VIN D (2004)
Air Door Actuator / Motor: Service and Repair
Auxiliary Blend Door Actuator
AUXILIARY BLEND DOOR ACTUATOR
REMOVAL
NOTE: The blend door actuator is shown; the mode door actuator is similar.
1. Remove the third row seat.
2. Position the RH rear quarter trim panel aside.
3. Remove the blend door actuator.
1
Disconnect the electrical connector.
2
Remove the screws.
3
Remove the blend door actuator.
INSTALLATION
1. To install, reverse the removal procedure.