F 550 4WD Super Duty V10-6.8L VIN D (2004)
11. Remove the four bolts and the TB spacer.
-
Discard the TB spacer gasket.
INSTALLATION
1. Install the TB spacer.
1
Install a new TB spacer gasket.
2
Position the TB spacer.
3
Install the four bolts in two stages.
-
Stage 1: Tighten the bolts to 9 Nm (80 lb-in).
-
Stage 2: Tighten an additional 90 degrees.
2. Connect the TP sensor electrical connector.
3. Connect the hose and electrical connector to IAC valve.