F 550 4WD Super Duty V10-6.8L VIN D (2004)
Crankshaft Position Sensor: Service and Repair
CRANKSHAFT POSITION (CKP) SENSOR
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the accessory drive belt from the A/C compressor pulley.
3. Raise and support the vehicle.
4. Disconnect the wiring harness connector from the crankshaft position sensor.
5. Disconnect the A/C compressor field coil electrical connector.
6. NOTE: It is not necessary to remove the A/C compressor bolts.
