F 550 4WD Super Duty V10-6.8L VIN D (2004)
5. Remove the restraint system diagnostic tool from the vehicle harness side of the clockspring electrical connector.
6. Install the clockspring wire harness and electrical connectors.
1
Route the clockspring wire harness down the side of the steering column and into the holders.
2
Connect the clockspring electrical connectors.
-
Install the electrical connectors into the bracket.
7. Install the key-in-ignition warning indicator switch.
Vehicles with a passive anti-theft system
8. Install the passive anti-theft system (PATS) transmitter.
1
Position the PATS transmitter.
2
Install the PATS transmitter retaining screw.
