F 550 4WD Super Duty V10-6.8L VIN D (2004)
12. Install the tilt wheel handle and shank.
13. WARNING: To reduce the risk of serious personal injury, read and follow all warnings, cautions, notes, and instructions in the steering
wheel removal and installation procedure.
Install the steering wheel. Do not install the driver air bag module at this time.
14. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
15. Connect the battery ground cable.
16. With the restraint system diagnostic tools installed at all deployable devices, prove out the supplemental restraint system (SRS). See: Air Bag(s)
Arming and Disarming/Service and Repair/Prove Out Procedure
17. Disconnect the battery ground cable and wait at least one minute.
18. Remove the restraint system diagnostic tools from the clockspring electrical connectors at the top of the steering column.
