F 550 4WD Super Duty V10-6.8L VIN D (2004)
Suspension Spring ( Coil / Leaf ): Service and Repair
Front
Spring - Leaf
Removal
1. Remove the wheel and tire assembly.
2. Position Jack stands under the axle housing.
3. NOTE: The following step is for the left-hand shock only.
Remove the shock.
1
Remove the nut and bolt.
2
Remove the shock from the front spring cap.
4. CAUTION: Never reuse U-bolts. The U-bolts are a torque-to-yield design and cannot be retightened. Failure to use a new U-bolt can result in
loose or broken springs and suspension components.
Remove the U-bolts.
1
Remove the four nuts.
2
Remove the two U-bolts and the front spring spacer. Discard the U-bolts.