F 550 4WD Super Duty V10-6.8L VIN D (2004)
Drive/Propeller Shaft: Service and Repair
Driveshaft - Rear, Two-Piece
Driveshaft - Rear, Two-Piece
Material
Removal and Installation
1. Raise and support the vehicle.
2. Index-mark the driveshaft at the axle flange.
3. Disconnect the driveshaft from the axle flange.
1
Remove and discard the bolts.
2
Remove and discard the U-joint retainers.
^
Using mechanics wire, support the driveshaft.
