F 550 4WD Super Duty V10-6.8L VIN S (2000)
4. Remove the screws.
5. Unclip the J-clips.
6. Position the upholstery and remove the pushpins.
7. Remove the seat cushion pad from the frame.
8. Remove the upholstery hog rings.
ASSEMBLY
1. To assemble, reverse the disassembly procedure.
2. Check the restraint system for correct operation.
Rear Seat Cushion
DISASSEMBLY
1. Remove the seat. For additional information, refer to Seat-Rear, SuperCab.
NOTE: The 60 percent seat is shown. The 40 percent seat is similar.
