F 550 4WD Super Duty V10-6.8L VIN S (2000)
clean.
-
Use Metal Brake Parts Cleaner F3AZ-19579-SA or equivalent to clean the front disc brake rotor.
2. Note: Perform this step for DRW vehicles only.
Install the front wheel hub extender and nuts.
3. Install the front disc brake caliper anchor plate.
Disc - Motorhome Chassis
Disc - Motorhome Chassis
Removal
1. Remove the disc brake caliper anchor plate; refer to Brake Caliper Anchor Plate.
2. Remove the disc brake hub arid rotor as follows:
1. Remove the hub grease cap screws.
2. Remove the hub grease cap.
3. Remove the cotter pin.
4. Remove the spindle nut.
5. Remove the outer wheel bearing retainer washer.
6. Remove the outer wheel bearing.
7. Remove the hub grease cap gasket.
8. Remove the disc brake hub and rotor.
