F 550 4WD Super Duty V10-6.8L VIN S (2000)
Wheel Speed Sensor: Service and Repair
Four Wheel Antilock Brake System (4WABS)
Sensor, Front
Removal
1. Disconnect the battery ground cable.
2. Disconnect the front anti-lock brake sensor electrical connector.
3. Remove the front disc brake rotor.
4. CAUTION: Clean off debris that may have collected around the front anti-lock brake sensor before removal.
Remove the front anti-lock brake sensor.
1
Remove the front anti-lock brake sensor bolt and discard.
2
Remove the sensor.
Installation