F 550 4WD Super Duty V10-6.8L VIN S (2000)
10. Remove the Modular Engine Support Bracket from the engine.
11. Install the generator.
12. Install the fan shroud.
13. Install the throttle body adapter
^
Position a new throttle body adapter gasket.
^
Position the throttle body adapter.
^
Install four bolts and tighten in two stages:
-
Stage 1: Tighten to 8-10 Nm (71-88 inch lbs.).
-
Stage 2: Tighten an additional 85-95 degrees.
14. Note: The EGR valve is shown removed for clarity.
If equipped, connect the EVR solenoid electrical and vacuum harness.
15. If equipped, connect the EGR valve vacuum line.
