F 550 4WD Super Duty V10-6.8L VIN S (2000)
9. Remove the five line brackets by inserting a screwdriver in the stud hole and twisting.
CAUTION: Pull the bracket off the stud before attempting to pry it off the lines to prevent component damage.
10. Disconnect the auxiliary evaporator outlet line fitting.
11. Remove and discard the auxiliary evaporator outlet line.
INSTALLATION
1. Install the rear auxiliary evaporator outlet line and connect the spring lock coupling to the auxiliary evaporator outlet line.
NOTE: Lubricate the O-ring seals with PAG Refrigerant Compressor Oil (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or
equivalent meeting Ford specification WSH-M1C231-B.
2. Snap the rear auxiliary evaporator outlet line into the line brackets.
