F 550 4WD Super Duty V10-6.8L VIN S (2000)
Refrigerant Pressure Sensor / Switch: Service and Repair
Pressure Cut-Off Switch - Motorhome Chassis
Pressure Cut-Off Switch - Motorhome Chassis
Removal
1. Disconnect the electrical connector.
2. Remove the pressure cut-off switch.
Installation
1. Follow the removal procedure in reverse order.
-
Lubricate the 0-ring seal with PAG Refrigerant Compressor 0il (R-134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C) or equivalent
meeting Ford specification WSH-M1C231-B.
