F 550 4WD Super Duty V10-6.8L VIN S (2000)
7. Remove the fuel line.
8. Disconnect the heater hose.
9. Remove the bolts.
10. Remove the four bolts and remove the fuel injection supply manifold.
11. If necessary, remove the fuel injectors.
INSTALLATION
1. Inspect and install new O-ring seals as necessary.
CAUTION:
^
Use propane fuel approved O-ring seals only. Use of non-approved O-ring seals could result in fuel leaks.
^
Do not use silicone based lubricants on the O-ring seals. Damage to the vehicle may occur.
