F 550 4WD Super Duty V10-6.8L VIN S (2000)
Torx Bit Tool Set Used For T55 "Torx Plus" Bit
SPECIAL SERVICE TOOL(S)
REMOVAL
1. Remove the utility tray, if necessary.
2. Remove the safety belt bolts.
1
Use the T-55 Torx bit to remove the safety belt buckle bolt.
2
Use the T-55 Torx bit to remove the safety belt tongue bolt.
3. Remove the safety belt.
1
Remove the safety belt buckle.
2
Remove the safety belt tongue.
INSTALLATION
1. Follow the removal procedure in reverse order.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraint system for correct operation.
