F 550 4WD Super Duty V10-6.8L VIN S (2000)
1. Follow the removal procedure in reverse order.
2. Note: Although the pump has four mounting bolt holes, only three bolts are used to mount the pump on the engine.
When connecting a fitting with a seal ring, the ring must be replaced.
-
Use the Seal Replacer to install a seal ring over a fitting.
3. Fill and leak check the system.
Pump - Motorhome Chassis
Pump - Motorhome Chassis
Removal
1. Drain the power steering reservoir.
2. Remove the accessory drive belt.
