F 550 4WD Super Duty V10-6.8L VIN S (2000)
Install the clutch pedal position switch on the clutch master cylinder push rod, and secure it with the switch cover.
14. Install the new push rod bushing.
15. WARNING: The clutch pedal is under spring tension.
Connect the clutch master cylinder push rod to the clutch pedal.
16. Raise and support the vehicle.
17. Correctly route the hydraulic tube and slave cylinder to the transmission.
18. Install the slave cylinder.
^
Compress and twist the slave cylinder to lock it onto the transmission.
19. Connect the clutch hydraulic tube to the floor pan clip.
20. Lower the vehicle.
21. Connect the clutch hydraulic tube to the dash clip.
22. Press the clutch pedal to seat the push rod in the clutch master cylinder.
