F 550 4WD Super Duty V10-6.8L VIN S (2000)
revolutions.
10. Remove and discard the nut and washer.
^
Use the special tool to prevent the flange from turning while removing the nut.
11. NOTE: Index-mark the flange and the pinion shaft.
Using the special tool, remove the flange.
12. CAUTION: Do not damage the pinion, the bearings, or the cup.
Remove the pinion.
^
Using a soft face hammer, tap the pinion through the outer bearing. Remove the pinion through the rear of the differential housing.
13. Using the special tools, remove the pinion seal. Discard the seal.
