F 550 4WD Super Duty V10-6.8L VIN S (2000)
1. Install the inner and outer bearing cups.
1. After placing the inner and outer bearing cups in their bores, place the special tool on the inner pinion bearing cup.
2. Place the special tool on the outer pinion bearing cup.
3. Install the special tool into the replacer tools.
2. Tighten the special tool to install the pinion bearing cups into their bores.
Using 205-DO55 and 205-153
3. Drive the outer pinion bearing cup into the axle housing, using the special tools.
4. Drive the inner pinion bearing cup into the axle housing, using the special tools.
Setting pinion depth
5. CAUTION: Whenever the cups are replaced, the differential pinion bearings must also be replaced.
