F 550 4WD Super Duty V10-6.8L VIN S (2000)
4. Install the lower gearshift lever and gearshift lever blocks into the shift housing.
^
Install the gearshift lever blocks with the notches facing downward.
5. CAUTION: Do not use a silicone sealing compound.
Note: Do not wait longer than ten minutes to tighten the bolts due to the rapid cure time of the sealant.
Install the shift housing.
^
Apply Gasket Maker F8AZ-1913508-AB or equivalent meeting Ford specification WSK-M2G348-A5 to the sealing surfaces.
6. Install the upper gearshift lever.
7. Install the shift lever boot.
