F 550 4WD Super Duty V10-6.8L VIN S (2000)
Connect the control rod to the lower shifter arm.
4. CAUTION: Hold the control lever against the 4H detent while tightening the bolt. This will ensure correct transfer case gear engagement during
transfer case operation.
Hold the control lever against the 4H detent while tightening the bolt.
5. Lower the vehicle.
6. Position the shift lever with the bezel and boot assembly and install the: bolt.
7. Position the bezel and boot assembly and install the screws.
8. Verify the shift sequence, from 2H to 4L, to 2H.