F 550 4WD Super Duty V10-6.8L VIN S (2000)
Back Window Glass: Service and Repair
REMOVAL
1. Remove the rear seat, if so equipped.
NOTE: Removal of the back window glass requires an assistant to hold the back glass window as it is pushed out.
2. Remove (pull off) the rear seat upper pad.
3. Remove the rear safety belt D-rings, if so equipped, from the rear of the cab.
4. Remove the scuff plates.
5. Partially remove the weatherstrip from the rear of the door jamb.
6. Remove the C-pillar trim panels, if so equipped.
7. From inside the vehicle, pull down on the back window glass weatherstrip and push back the window glass and back window glass weatherstrip
from the back window glass opening.
8. Remove the weatherstrip from the rear window.
9. Remove all traces of butyl from the window glass opening and the back window weatherstrip.
INSTALLATION