F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Oil Cooler: Service and Repair
Oil Cooler
Removal
1. Remove the intake manifold.
2. Remove the bolts and the Exhaust Gas Recirculation (EGR) cooler supply port cover.
^
Clean and inspect the gasket. Replace if necessary.
^
Clean and inspect the sealing surfaces.
3. Remove the bolts and the oil filter base.
^
Clean and inspect the gasket. Replace if necessary.
^
Clean and inspect the sealing surfaces.
4. NOTE: The oil cooler is installed as an assembly.
Remove the bolts and the oil cooler assembly.
^
Clean and inspect the gasket. Replace if necessary.
^
Clean and inspect the sealing surfaces.
