F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Wait To Start Light: Description and Operation
Glow Plug Indicator Lamp
Glow Plug Indicator
The Glow Plug Indicator Lamp (GPIL) is located in the instrument cluster and is used to prompt the operator when the engine is ready to be cranked
and started. When the light goes out, the vehicle is ready to start. As a bulb check, the light is commanded on at every key cycle even though the glow
plug system may not be required. On-time normally varies between 1 and 10 seconds. Wait-to-Start indication is independent of glow plug relay
on-time as the glow plug system can stay on after the indicator goes off.
The indicator is controlled by the instrument cluster, based on electronic information from the PCM. The PCM sends an electronic signal command,
via Standard Corporate Protocol (SCP) communications, to the cluster on how long to keep the indicator on. The instrument cluster performs
diagnostics for the GPIL circuit.
