F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
SPECIAL TOOL(S)
REMOVAL
1. Remove the utility tray, if necessary.
2. Remove the safety belt bolts.
1
Use the T-55 Torx bit to remove the safety belt buckle bolt.
2
Use the T-55 Torx bit to remove the safety belt tongue bolt.
3. Remove the safety belt.
1
Remove the safety belt buckle.
2
Remove the safety belt tongue.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^
Make sure the safety belt webbing is not twisted prior to installation.
^
Make sure to tighten nuts and bolts to specification.
2. Check the restraint system for correct operation.
Front Safety Belt Retractor - With SIR, Supercab
