F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
Crewcab
Safety Belt Bolt Bit
SPECIAL TOOL(S)
REMOVAL
1. Remove the shoulder safety belt guide.
1
Position the shoulder safety belt guide cover up.
2
Use the Seat Belt Bolt Bit to remove the bolt.
3
Remove the shoulder safety belt guide.
NOTE: Inspect the shoulder safety belt guide and cover for damage. If the shoulder safety belt guide or cover is damaged or cover does not
remain closed, install a new shoulder safety belt guide.
2. Position the rear seat back forward.
3. Remove the utility tray, if necessary.
4. Remove the rear door scuff plate and the rear corner trim panel.
5. Remove the safety belt retractor.
1
Use the Seat Belt Bolt Bit to remove the bolt.
2
Remove the safety belt retractor.
