F 550 4WD Super Duty V8-6.0L DSL Turbo VIN P (2003)
4. Using the special tool, remove the pulley.
-
Inspect the pulley or marks in the web area near the hub. If there are two paint marks, discard the pulley. If there is no paint or one paint mark,
use a paint pencil to mark the web area of the pulley near the hub.
5. To install, reverse the removal procedure.
6. CAUTION: Replacement of the power steering pump pulley is necessary after being removed and installed two times.
Using the special tool, install the power steering pump pulley.
