Ford F-550 Cross-Member Replacement | Frame Service and Repair
2. NOTICE: Support the transmission with a suitable heavy duty transmission jack.
-
Place the jack so the fluid pan does not support the weight of the transmission.
-
Fasten a strap over the top of the transmission and to both sides of the jack.
Failure to use a heavy duty transmission jack can result In damage to the transmission.
Support the transmission.
TorqShift(R) 6 Transmission
3. Disconnect the 3 wire harness retainers.
All Vehicles
4. Disconnect the 3 wire harness retainers.
5. NOTE: The transmission support insulator studs may come out of the insulator while removing the nuts. Install new transmission support
insulator studs if the studs come out of the insulator.
Remove and discard the transmission insulator nuts.
6. Remove the nuts and bolt plate from the LH transmission support crossmember.
-
Discard the nuts.
7. Remove the nuts and bolt plates from RH the transmission support crossmember and gusset.
-
Discard the nuts.
